Nickel Alloy Welding WireTig Wire ERNi-1
| Standards |
| EN ISO 18274 – Ni 2061 – NiTi3 |
| AWS A5.14 – ER Ni-1 |
Features and Applications
ER-Ni1 is used for the welding and cladding of Nickel 200 and Nickel 201 alloys.
Perfect for joining Monel alloys and copper-nickel alloys to carbon steels.
Ni1 contains enough titanium to control the weld-metal porosity on welding processes.
Typically used in the chemical processing industries, synthetic fibre production & food processing equipment etc.
Typical Base Materials
Nickel 200 and 201*
* Illustrative, not exhaustive list
| Chemical Composition % | ||||||
| C% | Mn% | Fe% | P% | S% | Si% | |
| max | max | max | max | max | max | |
| 0.05 | 0.80 | 0.70 | 0.030 | 0.010 | 0.75 | |
| Cu% | Ni% | Co% | Ti% | Al% | ||
| max | 93.00 | max | 2.00 | max | ||
| 0.20 | min | 1.00 | 3.50 | 1.00 | ||
| Mechanical Properties | ||
| Tensile Strength | ≥410 MPa | |
| Yield Strength | ≥200 MPa | |
| Elongation | ≥30 % | |
| Impact Strength | ≥100 J | |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 – TIG: I1 (Argon)
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG
| Packaging Data | |||
| Diameter | Length | Weight | |
| 1.60 mm
2.40 mm |
1000 mm
1000 mm |
5 Kg
5 Kg |
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
Related Products
-
Nickel Alloy Welding Wire ERNiCu-7 Nickel Tig W...
-
ERNiFeCr-1 Nickel Alloy Welding Wire, Nickel Ti...
-
Nickel Alloy Welding Wire ERNiCrCoMo-1 Nickel T...
-
Nickel Alloy Welding Wire ERNiCrMo-10 Tig Wire
-
ENiFe-CI Nickel Alloy Welding Wire, FN 55 Nicke...
-
Nickel Alloy Welding Wire ERNiCr-3 Nickel Tig W...