Nickel Alloy Welding Wire ENiFe-Cl
Features and Applications
Ferro-nickel solid wire used for welding cast iron and ductile iron.
Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels.
Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings.
Precision layer wound for superior wire feeding characteristics.
Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc
Typical Base Materials
Grey cast iron, malleable, nodular*
* Illustrative, not exhaustive list
| Standards |
| EN ISO 1071 – SC NiFe-1 |
| AWS A5.15 – E NiFe-CI |
| Chemical Composition % | ||||||
| C% | Mn% | Si% | P% | S% | ||
| max | max | max | max | max | ||
| 2.00 | 0.80 | 0.20 | 0.03 | 0.03 | ||
| Fe% | Ni% | Cu% | Al% | |||
| rem. | 54.00 | max | max | |||
| 56.00 | 2.50 | 1.00 | ||||
| Mechanical Properties |
||
| Tensile Strength | 400 – 579 MPa | |
| Yield Strength | - | |
| Elongation | - | |
| Impact Strength | - | |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 – I1, Ar + 1-2% O2
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF
| Packaging Data | |||
| Diameter |
Weight | Spool | Pallet Qty |
| 1.20 mm | 15 Kg | BS300 | 72 |
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
